RUTM08

WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall Port forward, traffic rules, custom rules

Firewall status page View all your Firewall statistics, rules, and rule counters

Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology Visual representation of your network, showing which devices are connected to which other devices

DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS Supported >25 service providers, others can be configured manually

Network backup VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing Balance Internet traffic over multiple WAN connections

Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

SSHFS Possibility to mount remote file system via SSH protocol

VRF support Initial virtual routing and forwarding (VRF) support

Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN Port and tag-based VLAN separation

WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control Flexible access control of SSH, Web interface, CLI and Telnet

OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption

IPsec IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN Method of building scalable IPsec VPNs

SSTP,  SSTP client instance support

ZeroTier ZeroTier VPN client support

WireGuard WireGuard VPN client and server support

Tinc, Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

Tailscale, Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

Supported modes Client, Server

Supported connection types TCP

Supported modes Server, Client

Supported connection types TCP, USB

Custom registers  MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats  8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Protocol HTTP(S), MQTT, Azure MQTT

Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server

Modbus MQTT Gateway  Allows sending commands and receiving data from MODBUS Server through MQTT broker

Supported modes Station, Outstation

Supported connection TCP, USB

DLMS Support DLMS – standard protocol for utility meter data exchange

Supported modes Client

Supported connection types  TCP, USB

WEB UI, HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA Firmware update from server, automatic notification

SSH SSH (v1, v2)

Email Receive email message status alerts of various services

TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT MQTT Broker, MQTT publisher

SNMP SNMP (v1, v2, v3), SNMP Trap

JSON-RPC  Management API over HTTP/HTTPS

RMS Teltonika Remote Management System (RMS)

Cloud of Things Allows monitoring of: Device name, HW version, Serial number, FW version, WAN IP. Allows actions from the cloud: FW update, Reboot

Cumulocity Allows monitoring of: Device name, HW version, Serial number, FW version, WAN IP. Allows actions from the cloud: FW update, Reboot

Azure IoT Hub Allows monitoring of: Wan IP, Number of bytes send/received, Model, Manufacturer, Serial, Revision, FW version and collected data of industrial devices

CPU MediaTek, Dual-Core, 880 MHz, MIPS1004Kc

RAM 256MB, DDR3

FLASH storage 16MB serial NOR flash, 256MB serial NAND flash

WEB UI  Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA Update FW

RMS, Update FW/configuration for multiple devices at once

Keep settings, Update FW without losing current configuration

Factory settings reset, A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration

Operating system RutOS (OpenWrt based Linux OS)

Supported languages Busybox shell, Lua, C, C++

Development tools SDK package with build environment provided

GPL customization You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs

Data rate USB 2.0

Applications Samba share, USB-to-serial

External devices Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 50 V detected as logic high

Output 1 x Digital Output, Open collector output, max output 50 V, 300 mA

Events Email, RMS

I/O juggler Allows to set certain I/O conditions to initiate event

Connector 4-pin industrial DC power socket

Input voltage range 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max

PoE (passive) Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 50 VDC

Power consumption  Idle: < 1.8 W / Max: < 5.5 W

Ethernet 4 x RJ45 ports, 10/100/1000 Mbps

I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs 8 x LAN status LEDs, 1 x Power LED

Power 1 x 4-pin power connector

USB 1 x USB A port for external devices

Reset Reboot/User default reset/Factory reset button

Other

Casing material Anodized aluminum housing and panels

Dimensions (W x H x D) 115 x 32.2 x 95.2 mm

Weight 353 g

Mounting options DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature -40 °C to 75 °C

Operating humidity 10% to 90% non-condensing

Ingress Protection Rating IP30